Although a lot closer to my home location than the previous four activations, Mount Taylor involved a longer drive of over 4 hours from the Central Coast into the ACT (Australian Capital Territory).

This action was part of the celebration of 6 months of SOTA in the VK1 (ACT) association organised by Andrew VK1NAM, who encouraged involvement of all operators interested in SOTA to take part in the event.

Rod VK2LAX traveled down on the Saturday however Jim VK2LC and myself made the journey only on the Sunday morning and with a planned 9:15 am start, this meant rising at the ungodly hour of 3am to be on the road by 4am. The drive down was uneventful apart from fog along the whole on the federal highway, adding about 30 mins to the journey.

The temperature on Mt Taylor dropped once the fog listed but the views (that we saw nothing of, on the climb up) were amazing.

As planned, I set up my equipment on 20m, (FT817 plus inverted V dipole on a 6m squiddy) and Rod and Jim set up for 40m, Rod using an FT897 and a similar SOTABeams linked dipole, but this time set to 40m and Jim with an FT817 and a loaded vertical antenna.

This was Rod’s & Jim’s first summit activation and were rewarded with many contacts on 40m. My decision to run 20m was not as successful with no contacts on that band despite self-spotting, but two on 40m (using the 20m dipole) and, as I had remembered to bring the Wouxon dual-band HT along, thirteen contacts on 2m FM, many of them summit to summit.

So all three of us all well and truly “activated” this peak.

Mt Taylor is a favorite destination for people walking their dogs and running for fitness so we have several visitors asking what on earth we were doing! With a little more preparation this could have been a great opportunity to capture one or two new prospective radio amateurs – maybe at the next one ….

The day rounded out very nicely with most of the activators meeting up at a Canberra cafe for lunch together. A chance not only for the VK2 “interlopers” to meet the VK1 activators but also for some VK1 activators to meet fellow VK1 activators that they had not met previously.

All in all a great day and thanks goes to Andrew VK1NAM for organising it all.

PHOTOS

Radio Operations.

VK2LAX busy working 40m pile-up.

Jim VK2LC taking a breather between contacts.

VK2LC and Vertical antenna in background, my (VK2JI) equipment in foreground.

Video of VK2LC/P1 operating 40m – his first SOTA summit activation.

Views.

Further pictures, those from our event photographer Matt Jarman can be found here:  http://s269.photobucket.com/user/opdu/library/SOTA%20Mt%20Taylor

Activators lunch.

Location of cafe based on phone location request from April!

Activators lunch participants (1/2)

Activators lunch participants (2/2)

Stations worked:

40m: Paul VK5PAS/P (S2S), Peter VK3PF/P (S2S)

2m: Michael VK1XYZ, James VK1DR/P (S2S) both before and after UTC change-over, Matt VK1MA/P (S2S) both before and after UTC change-over, Andrew VK1DA/P (S2S), Murray VK1UU, Ian VK1DI/P (S2S), Glen VK1FB/P (S2S), John VK1JST/P (S2S), Andrew VK1NAM/P (S2S), Peter VK1IRC/P (S2S), Mark VK1MDC/P (S2S),

In Germany the school holidays in various regions are starting and many, many cars head south through Bavaria to Mediterranean countries causing lots of long delays (stau s) on Bavarian roads so we decided on an early start (8am) from Munich and this was a very good decision as we had a clear run to Ehrwald/obermoos from where we took the Tiroler Zugspitzebahn. As the Zugspitze mountain belongs to both Germany & Austria, there cable cars from both countries. This was the first time I had tried the access from Austria. I can highly recommend it. As well as being cheaper than the German options, with the modern Austrian cable car you go from the valley to the summit in just less than 10 minutes in one stage, whereas from the German side it takes longer partially as you have to change cars to get to the summit.

EQUIPMENT USED:

FT817 – 5W
20m only section of SOTABeams bandhopper antenna as inverted v dipole.
6m sqidpole mast (purchased at Friedrichshafen for 30 euros)

I operated from the viewing platform nearest the actual summit (on the German side of the border). Even though it was early there were already a lot of people around so I needed to take my spot quickly. Some of the railings are slanted so these are no good for fastening the ‘sqid pole’ (aka fishing pole) to. Luckily I found some vertical railing and with the help of my wife and her friend (both of whom had never been on the Zugspitze before and totally enjoyed the day) I managed to erect the antenna quickly between gusts of cold wind (temperature on the Zugspitze during my visit was 2 degrees Celsius).

I took a quick look around and found that my planned frequency of 14.285 Mhz appeared free so switched to the smartphone to self spot. After my problems with Internet access the previous week, Andy kindly set me up with SMS spotting capability. I had tested this earlier in the week and it had worked fine, so it ‘should’ work fine here as well, but it didn’t as I had lost phone service when I went into Austria and now the phone needed to be manually set back to a suitable mobile network provider. Of course all of this happened in sunlight where I can hardly see the screen of the phone and when I was in rush to start before my fingers froze (I had gloves of course but operating and writing with gloves on is difficult).
I decided to simply put out a call even though I was a good 30 mins ahead of my planned schedule and thankfully Martin DF3MC came back to my call with a BOOMING strong signal. Martin had helped me with advice about several German SOTA summits, so I had hoped to work him. I had hoped to contact Rudi HB9MKV/OE7WRJ who also helped me in my preparations for the Zugspitze, however that contact was not to be. Thanks to both Martin & Rudi for their very useful advice.
Once Martin ‘spotted me’ on SOTAWatch, as the old saying goes – the rest is history. I had a pile-up of many more stations than I could hope to work, so I apologise here to those who called but I could not get back to, before I had to pack-up because I had lost feeling in my fingers and the area where I was, was becoming busier with more public arriving on each cable car.

STATIONS WORKED:
DF3MC  EA2DT GI4ONL G0RQL EB2JU EA2CKX M3XIE EA1DFP LY2AE DJ1SD M6BLV G4APF G0TRB EB2CZR M0BSV PA0B GW4ZHI.

Zugspitze setup

In operation

Support and assistance from XYL

Working into the distance from above the clouds!

Next activation OE/TI-517 Hohe Salve on Wednesday 17/7/13 around noon local time – 14.285MHz.

Sunday 7th. July 10:10 local (8:10 UTC) and I had set up my FT817 and EFHW antenna just down from the top of the Jenner mountain (1874m asl) near Berchtesgaden in Bavaria. It was a beautiful sunny morning but I only had 30 mins to activate the summit because of other plans. I tuned on the FT-817 on 40m to be hit my a barrage of stations splattering across the usual SOTA frequencies. I put out a couple of calls on 7.090 as it was less conjested than 7.118 (my planned frequency). No answers. I then tried to self spot but got an error in rucksack radio that I could not read in the bright sunlight. I tried again on 7.118 and to my relief Milos S53EO came back to my call, he did not have Internet connectivity and so could not spot me but OE7HPI who I worked next did and further calls followed but by this time the QRM from stations near to the frequency was becoming really bad. I was lucky to manage two more contacts with DL3HXX & HB9AAQ meaning I can claim the summit but by the end of my available time the QRM had got so bad that I would not have been able to work any more stations. I had hoped to operate on 20m as well but simply ran out of time.

What I have learnt from this is that I need to find why spotting from my phone didn’t work and try 20m first next time. The next planned activation has limited space for a 40m wire in any case so is likely to be using just the whip on 20m. The next summit is the Zugspitze at 2962m, the highest place in Germany.  Place check SOTAWatch as date may change. As I have to drive there from Munich, the activation will probably be too late for a contact into VK even if the path were open.

Jenner – way to the summit

Jenner – view from summit

STATIONS WORKED:

S53EO, OE7HPI, DL3HXX, HB9AAQ.

Since VK2 (New South Wales in Australia) where I live, isn’t classified yet for SOTA, why not activate a summit in another association – indeed why not in the original SOTA association G?

While visiting relatives I got the chance to activate a simple, 1-pointer, summit G/TW-004 Bishop Wilton Wold (known from my childhood as Garrowby Hill). It was a very simple set-up with the FT-817 and the end fed half wave – laid across the top of a nettle patch by the side of the lay-by. After walking out and back into the activation area I managed to work 9 stations on 40m  in less than half an hour and tried 2m as well  but without any response on that band.

Well, I now have one activator point – only 999 to go to the mountain goat!

STATIONS WORKED:

G6TUH, G6LUZ, G8MIA, G0RQL, M0MDA, GM0AXY, G3XQE, M6WSB, M3XIE.

There has been a lot of comment recently on the SOTA Australia list about the effectiveness (or not) of the “miracle whip” antenna and its derivatives. Well I have a Chinese version of this design and have found the tuner component to be very effective when used to tune an End Fed Half Wave antennas against their counterpoises. The EFHW is a larger set-up than simply using the telescopic whip on the tuner. Having read that adding a counterpoise improves what is otherwise a “not so good” performance. I decided to to test out this statement. I was able to add a tab to the BNC plug that holds the whip, by using a solder tab ring that would normally sit behind a round BNC socket.

This done I used my antenna analyser to come up with a resonant length of the wire wrapping 30 AWG tin covered copper wire that I use. This length turned out to be  9 metres 87.5 centimetres. This provides a dip both on 40m (1/4 wavelength long) and 20m (1/2 wavelength long). The result on received signals was immediate – an increase in signal strength of 2 S-Points compared to the whip without a counterpoise. As yet I have not managed to make a contact, so the transmit side remains a question mark – maybe tomorrow.

Here are some pictures of the (very simple) set-up on the back deck of my house.

Overview of test set-up. FT817 running off internal batteries, Miracle Whip tuner, telescopic antenna and counterpoise going off into the garden.

Operating position with ft817 sat on its bag and the Miracle whip connected.

Close up of counterpoise connection to the whip.

Mt Elliot being the only likely future SOTA summit near Gosford, NSW and being a 5 star easy summit – Drive up, walk a little, lots of area to set up, toilets on site, electric BBQs on site, benches and cover, makes it an ideal test site for equipment to be used on more difficult peaks later.

Here are some photos from the days activities – some pictures of the area, the views and then some radio work – those shown in the pictures are Rod VK2LAX the one looking at information board and in other shots, Dave VK2DLS in a few shots wearing the cap – a new convert to SOTA, he came up to see what it was all about after a conversation with me via the local 2m repeater on the way up and in the last shot myself operating the FT-817 and lightweight version of  a 40m horizontal loop antenna. Please note, although sat near the cars, no power was coming from them, in the spirit of SOTA the rigs are powered either by internal of SLAB batteries. (still waiting in connectors for my Lipo battery).

I am glad to report the tests of the 40m full wavelength loop antenna using lightweight 3m squid poles, mini-tripod supports, very thin, single core, “wire wrapping wire” and a Q-section of  RG-179 coax of the correct length (based on its velocity factor) worked very well indeed. Initially we used my FT-817 at 5W but for a couple of calls after lunch I decided to really test the antenna with 100W from Rod’s FT857 – all worked without issue. as a comparison the a buddy pole “seemed” about 1 S-point down on receive compared to the loop.

Thanks to the following activators for their contacts from this /P site – Wayne VK3WAM/P on VK3/VS-014 & VS-011, Peter VK3ZPF/P on VK3/VN-028, Rik VK3KAN/P on VK3/VE-001, Mark VK3PI on VK3/VC-034,  Paul VK5PAS/P on VK5/SW-011, Brian VK3MCD/P on VK3/VC-001 and Darren VK3FDJT/P on VK3/VN-016.

I have just received a Chinese copy of the “miracle whip” which I intend to test out next weekend also using its ATU with a 40m end-fed and counterpoise, again made with the ultra thin connection wire.